Search Results

Search results 1-20 of 90.

  • User Avatar

    Project Champions

    Buff55 - - Work in progress

    Post

    I'm not sure if it helps but when I painted mine I went to a Lowes got a few swatches and matched the color of my hadatai. The smallest size that they sold me could paint ten masks and it wasn't too expensive ether. I'm not really sure how well a silicone based interior paint will hold in the long run but the results are great.

  • User Avatar

    Quote from cici: “You need to sweat more! ” So sweat is what caused this unusual change? For a second I was going to blame black hand since it comes from metallic objects.

  • User Avatar

    I’m not really sure what happened but when I first got my bodysuit I couldn’t use my phone and eventually over time I was was able to use it without a problem. What could have possibly happened and has this happened to anyone else?

  • User Avatar

    Those are the ones that I’ve been using to style the wig. I think the main problem that I’m having is with my wig stand being smaller than my actual head so the clips end up sitting higher than they should be. I actually reworked my kigs eyes a bit by removing some of the internal structure of my mask to make a flatter space to mount them. What I removed was only some of the support structure that the printer used for itself so no harm was really done to it. I may actually repaint the face and s…

  • User Avatar

    Well it looks simple at first but when it actually comes to doing it I can never get it to look right. It doesn’t help that I tried to strengthen a curly wig and didn’t get it perfectly straight. As far as the hat goes I’m going to make it out of fleece. I might even make a second set of clips for her winter outfit (when I start making it but I have a Ranamon kig to work on for practice)

  • User Avatar

    A bit of an update on the wig. I managed to sort of fake having the hair wrap around my head and be clipped up front by using some of the wig that was next to where I cut some bangs. There’s still some work to do with straightening it but I doubt I’ll be able to get it perfect. I still have to make the final version of her clips with modeling clay but these construction paper ones should do for now. imgur.com/a/olIKGCn

  • User Avatar

    I haven't been able to really kig outdoors yet because of the cold weather (I don't have anything to wear that would keep me warm for long except for an eskimo costume) but I have found that it provides better lighting than artificial light. I still have the fogging issue though because I wear glasses under my mask.

  • User Avatar

    Sorry about the recent lack of updates. Events in my life are preventing me from continuing as quickly as I'd like to but I'm still working on it. Having a bit of trouble with styling the wig. The hairstyle is proving harder than I thought. I'm also trying to restore another wig that I'm going to use for a Serena kig since she has the same facial structure as Dawn so I could use the same mask.

  • User Avatar

    I’m honestly not really sure what it’s for. I could say it’s for our town’s small businesses but then it’s not at the same time. I might be fine since we sometimes have mascots and fursuiters come but it’s not really consistent.

  • User Avatar

    Every year my town holds a street festival and I was going to kig there as my first time however I’m a bit worried about how it will go concidering that it’s a small town and word spreads fast. If I’m seen unmasked the word may spread and as far as I’m aware I’m the only kig in a few miles (at least according to the map of kigs.) Am I being rational about this or am I blowing things out of proportion and getting worked up over nothing?

  • User Avatar

    I’ve been refining my hip pad’s shape and size so they don’t stick out so much and make me look like an Ultra Recon Squad member. The one on the left was been refined. imgur.com/a/LGWBjPn

  • User Avatar

    I don’t have anything to really show for the pokétech yet. I’m still trying to figure out what I have to do inside because I need to convert the signals. Not to mention writing the code for it to run the apps. (May be a bit of a challenge since I’m a mechanical engineer and not a software engineer. I’m glad the apps are simple.)

  • User Avatar

    I think I know the one that you’re talking about. Someone did a cosplay version of it over on DA. deviantart.com/creamypumpkin/a…i-hairstyle-cos-498233259 Something that I realized was that I’m going to need to make a bigger hat. The one that I have doesn’t fit over my mask. The pokétech has run into a small problem with the screen having too many pins than the Arduino. I may have to make some kind of breadboard to get the signal to split into the right values for each pin.

  • User Avatar

    A bit of an update on the wig. After the hair has completely covered my mask I figured that I would just cut it into bangs and I’m pretty pleased with the result. I used a picture of Dawn without her hat and her hair down as a reference and I think I got pretty close. imgur.com/a/ZubcCmx

  • User Avatar

    imgur.com/a/LhinI1W Here are some pictures of the hip pads in use. Slightly NSFW because my kig is in her underwear but I don’t have any form fitting clothes for it. Sorry for the messy wig.

  • User Avatar

    Hello

    Buff55 - - Introductions

    Post

    Greetings fellow kigurumi. Welcome to the forum.

  • User Avatar

    The top layer is only shifted over so I could try to separate it with a heated spatula and fuse it in place but I’m not sure if that’s the best course of action. Anyway I’m almost done with my hips but they need to be shaped a little more since they’re a little large right now. I might try to make an “M pad” using the scraps that I have from making my breast forms but I have no idea where to start with that.

  • User Avatar

    Yea. The printer glitched in the final hours. It took 27 hours for it to print only for that to happen. I might fill it in with some modeling clay or make another mask and repurpose this one for Halloween and be a broken doll. The pokétech is actually a part of a series I’m doing on deviantart that I’m calling Project Replon. Fully functional replicas for cosplay and everyday life is what I’m striving to create with what little engineering knowledge I have.

  • User Avatar

    @Takami Oh. I didn't realize you were doing a Dawn kig. How far did you get? It's actually done for the most part but the wig and hips are the last things that I need to do. I've actually been trying to upload pictures but for some reason they're too large to upload and I don't want to post low res pictures from my 3DS camera. I'm also working on a poketech by using an ardruno an a touchscreen from an old DS sta.sh/01hqhagw7pul Me in the whole suit so far aminoapps.com/c/cosplay/page/b…ukorKqnL2…

  • User Avatar

    I’ve taken the advice that you guys gave me and attached a strip of Velcro to the top of my mask. Now I just have to figure out how to attach the other piece to the wig. Might try sowing it in through the mesh. Having issues with submitting pictures now. Going to have to figure out how to make the file size smaller.