Sorry I realyzed to late that it´s common the create a thread about building a mask instead of just posting pictures. So I will continue my work in this thread.

The raw mask is made out of 6 3D-printed parts that are welded together. I hope you can see the Picture.

I did a lot of sanding and gab filling.

If youre interseted and want more details you can ask questions.

I did a lot of Adjustments to get the perfect fit. Velcro is used to be able to change the padding If wanted. Later I will loocking for a better airflow and other elastic bands if I need to. But for testing purposes it works fine.

My paintjob failed.
I used clear lacquer as finish but it dissolved the paint. Now I have to sanding the mask to remove the paint.

DSC03437(geschnitten;1000 x1000).jpg
I sanded the paint down and removed all the dust with water. On the picture you can see how I glued a third mount with 2K-glue on the mask. The 3 mounts for the elastic bands are made out of steel wire which I bended with rounded pliers. On the picture before you can see the two other mounts. They hold on verry strong.
PS. I´m really in love with 2K-glue. It´s the best glue on earth!

DSC03809_2mp.JPG
My Mask is finaly painted. I used Mr. Color like in the thread "Painting a mask".

I did the eyebrowns and eyelashes like j sensei in her Videos on Youtube :
But i used black foil that sticks by it´s self instead. Now i can change the expressions as often as i want.

DSC03930_2MP.JPG
I draw the eyes with mouse and keyboard in Krita and printed them out on photopaper. It was a bit difficult to find the right sice. I don´t know much about digital drawing and have no gear for it, but I´m happy with the result.

DSC03947_cut_2MP.jpg
I stiched two wigs together. It fits not perfekt, but thats ok. Later I will make a wig version 2.0.

The mask is finished so far. Maybe some of you see what cosplay i wanna do. It was a lot of work and a lot of fun and a lot of sanding.
Now I can understand why buing a kigurumi-mask is so expensife. The work was worth it and im happy with the result.

"So how did you get yours so smooth?"
I use 2K filler which I bought in my local hardware store and sanded everyhing and after that I used a filler spray to make it even smother but if you don´t sand it corectly the spray doesn´t make it better.

"What kinda stuff did you print the eyes in? It looks kinda glossy"
It´s photo paper. I didn´t used my own Printer an paper I used a photo printing automat. 0,30€ per photo.

"What kind of foam did you use for the padding?"
I don´t know, its purpose was some Kind of isolation. I just removed the aluminum film.

"And are the eyelashes and eyebrows just tape that you've stuck to the model?"
It´s not tape, just a stip I cut from a big roll which is round about 1m x 10m. The roll is made for a cut plotter wich cuts big sticker.
you can buy these foil in smaller sices.
But Maybe some kinds of tape also work, I don´t know,you can try it if you want.